Call us in Seattle
+1 (800) 871-6550
Capacitive Touch Display 10.1" LVDS
This display is directly compatible with the Apalis, Colibri and Verdin Family.
Highlights
Out-of-the-Box Experience with Toradex Carrier Boards
It works with the following Toradex products out-of-the-box:
- Verdin Development Board*
- Dahlia Carrier Board*
- Ixora Carrier Board (from V1.1A)
- Apalis Evaluation Board (with a Capacitive Touch Adapter)
- Iris Carrier Board (V2.0 or newer)
*Verdin DSI to LVDS Adapter is required
Scope of delivery
- 10.1” Capacitive Touch Display Panel
- LVDS cable
- 10 Pins 0.5mm FFC Ribbon Cable
Carrier Boards
The carrier board provides the necessary signal and power levels to the CoM. It also houses the application-specific connectivity and multimedia interfaces, such as USB, Ethernet, UART and HDMI.
Learn more about SBCs and Carrier Boards
Supported Modules
USB 3.0
USB 2.0
USB 2.0 Debug
Ethernet
PCIe
I2C
SPI
QSPI
UART
IrDA
PWM
GPIO
Analog Input
RS232
RS485
Serial ATA
SDIO/SD/MMC
CAN
Type-specific Extension Connector
JTAG
Switches
LEDs
Display Serial Interface
LVDS
HDMI
Digital Audio
S/PDIF In / Out
VGA
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Camera Serial Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Included Accessory
Altium CAE Data Freely Available
Supply Voltage
On-Board Power Supplies
Size
Temperature
Accessories
Toradex offers off-the-shelf accessories that can be directly used in end products. For a few of these accessories, design files including assembly drawings, schematics and Altium projects are available.
Toradex tests the peripherals listed in its webshop and works directly with vendors of Cameras, Modems, Displays, Sensors, and more, to make the integration with Toradex SoMs as easy as possible.
- USB 3.0: 1x USB-A (Host)
- LVDS: 1x Dual Channel
- LVDS: single/dual-lane up to 1920x1200/1366x768px, 60fps, 24bpp
Buy Now
1 Modules, 7 Carrier Boards, 3 Accessories
V1.0A
PN: 12121000
Capacitive Touch Displays (LVDS) for Apalis modules
LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board. -20° to 70° C Temp, Range. Size: 248.5 x 166.1 x 15.0 mm.
-
Quantity>0
-
Unit Price$263.90
Intended Use: For Evaluation/Development
V1.3A
PN: 01331300
Small form-factor Apalis Arm Computer Module family Carrier Board
Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm
-
Quantity1-99>99
-
Unit Price$149.90
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For End Products
V1.1Z
PN: 01151125
Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In/ Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm
-
Quantity>0
-
Unit Price$349.80
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
Small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board
Connectivity: USB 2.0: 1x Host/ 1x OTG, 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, up to 26 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 4/5-wire Resistive Touch
Physical: 6-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 100 x 72 mm
Intended Use: For End Products
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 2x Gigabit Ethernet, 1x RS232, 4x I2C, 1x SPI, 3x PWM, 4x ADC, 2x CAN, Up to 98x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 7-24V DC ±10% Supply Voltage, Size: 250mm x 200mm
-
Quantity>0
-
Unit Price$330.00
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V1.1F
PN: 99991105
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 2x Gigabit Ethernet, 1x RS232, 4x I2C, 1x SPI, 3x PWM, 4x ADC, 2x CAN, Up to 98x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 7-24V DC ±10% Supply Voltage, Size: 250mm x 200mm
-
Quantity>0
-
Unit Price$330.00
Intended Use: For Evaluation/Development
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 1x Gigabit Ethernet, 3x I2C, 1x SPI, 3x PWM, 4x ADC, 1x CAN, Up to 47x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 5-24V DC ±10% or USB-C (PD and BC) Supply Voltage, Size: 120mm x 120mm
-
Quantity>0
-
Unit Price$27.50
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V1.1D
PN: 99981103
Connectivity: USB 3.0: 2x USB-A (Host), USB 2.0: 1x USB-C (DualRole), 1x Gigabit Ethernet, 3x I2C, 1x SPI, 3x PWM, 4x ADC, 1x CAN, Up to 47x GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo).
Physical: 5-24V DC ±10% or USB-C (PD and BC) Supply Voltage, Size: 120mm x 120mm
-
Quantity>0
-
Unit Price$187.00
Currently low stock level. More coming soon. Please contact us for details.
Intended Use: For Evaluation/Development
V1.0A
PN: 01511000
Capacitive Touch Adapter for the new Parallel Capacitive Touch Displays. .
-30° to 85° C Temp, Range. Size: 20 x 20 x 8.4 mm.
-
Quantity>0
-
Unit Price$19.80
Intended Use: For Evaluation/Development
V1.0A
PN: 01631000
Mezzanine board for Verdin iMX8M Plus module
Key features:
-30° to 85° C Temp, Range. Size: 88 mm x 48 mm.
-
Quantity>0
-
Unit Price$49.50
Intended Use: For Evaluation/Development
V1.1A
PN: 01591100
Connects directly to the DSI Display Adapter Connector of the Verdin Development Board or Dahlia to provide an LVDS output. It is directly compatible with the Capacitive Touch Display 10.1" LVDS. No external power supply required.
Range. Size: 50 x 40 mm.
-
Quantity>0
-
Unit Price$44.00
Intended Use: For Evaluation/Development
× ![]()
