Call us in Seattle
+1 (800) 871-6550
Ixora Carrier Board
The Ixora Carrier Board is a fully featured carrier board for the Apalis module family. Along with the standard interfaces, Ixora comes with a combination of widely used Industrial interfaces like CAN 2.0b, I2C, and GPIOs which make it perfectly suitable for Industrial and embedded solutions. It also features mSATA, Mini PCIe and Micro SD slots, which lend the board its high flexibility and scalability. The Ixora is designed to be used as either SW development board or for small to medium volumes products.
하이라이트
The Ixora carrier board is compatible with the Apalis Arm family of modules. The Ixora carrier board packs a large number of Apalis features into a very optimised small form factor which has been designed to be cost effective in small to medium volume applications. It is designed to be used with the Apalis iMX8 (based on NXP® i.MX 8QuadMax SoC), Apalis iMX6 (based on NXP® i.MX 6 SoCs) Computer on Modules.
The majority of standard interfaces supported by the Apalis modules are supported by the Ixora carrier board using a combination of real-world connectors, card slots and 2.54 mm pitch pin headers.
High-speed interfaces include Mini PCI-Express, MicroSD, Gigabit Ethernet and mSATA. Support for common industrial interfaces including I2C, SPI, RS232, CAN and GPIO makes the Ixora carrier board perfectly suited for industrial and embedded applications.
Supported multimedia interfaces include HDMI, LVDS, TFT LCD, Digital and Analogue Audio, 10 bit parallel camera interface, MIPI Camera Serial Interface, and Resistive Touch.
- Ixora V1.1 is compatible with all Apalis modules except for Apalis iMX8 SKUs
- Ixora V1.2 is compatible with all Apalis modules
액세서리
Toradex는 최종 제품에 직접 사용할 수 있는 완제품 액세서리를 제공합니다. 이러한 액세서리 중 일부에 대한 설계 파일에는 조립 도면, 회로도 및 Altium 프로젝트가 포함되어 있습니다.
Toradex는 웹샵에 나열된 주변 기기를 테스트하고 카메라, 모뎀, 디스플레이, 센서 등의 공급업체와 직접 협력하여 Toradex SoM과의 통합을 가능한 쉽게 만듭니다.
- Compatible with Apalis iMX6Q IT and Apalis iMX6D IT
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis T30
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis iMX8
- Easily mounted to the Apalis Carrier Boards by means of 4 screws
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis Evaluation Board and Ixora Carrier Board
- LVDS cable (250mm) and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Plug and Play (Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
- Power Adapter: 12VDC 30W with international plugs
- Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
- MIPI CSI-2 interface
- onsemi AR0521 1/2.5" 5MP color image sensor with ISP
- M12 lens mount (S-mount)
로드맵
Min. Product Commitment
2034+
Hardware Roadmap
This roadmap indicates how the product is planned from a Toradex hardware development point of view. This is not a detailed release date representation, but visualization of our internal product development timeline.
For details about the Toradex phase-over policy please refer to the PCN Policy Page.
For more details about PID8 level changes and historical releases please refer to the developer page.
- 2023
- 2024
- 2025
- 2026
- 2027
- 2028
0133 Ixora Carrier Board
- Volume Production
지금 구매
1 모듈, 8 액세서리
V1.3A
PN: 01331300
Small form-factor Apalis Arm Computer Module family Carrier Board
Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm
-
수량1-99>99
-
단가US$134.40
현재 재고가 부족합니다. 곧 더 많이 입고될 예정입니다. 자세한 내용은 문의하기로 문의하십시오.
사용 목적: For End Products
V1.0B
PN: 23051001
Compatible with Apalis iMX6Q IT and Apalis iMX6D IT. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.
-
수량1-99>99
-
단가US$17.20
사용 목적: For End Products
V1.0B
PN: 23071001
Heatsink for Apalis TK1, iMX6Q and iMX6D modules
Compatible with Apalis iMX6Q, Apalis iMX6D and Apalis TK1. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40° to 200° C Temp.
-
수량1-99>99
-
단가US$17.20
사용 목적: For End Products
V1.1A
PN: 23091100
Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.
The fan is intended for development and evaluation purposes only.
Compatible with Apalis Evaluation Board and Ixora Carrier Board.
-
수량>0
-
단가US$19.90
사용 목적: For Evaluation/Development
V1.0A
PN: 21041000
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10° to 60° C Temp, Range. Size: 17 x 15 x 8 mm.
-
수량1-99>99
-
단가US$28.05
사용 목적: For Evaluation/Development
V1.1C
PN: 01131102
Accessory kit for Toradex carrier boards
Power Adapter: 12VDC 30W with international plugs. Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board.
-
수량>0
-
단가US$50.00
사용 목적: For Evaluation/Development
V1.1A
PN: 01641100
MIPI CSI-2 camera set based on the onsemi AR0521 image sensor
Key features:
- MIPI CSI-2 interface
- onsemi AR0521 1/2.5" 5MP color image sensor with ISP
- M12 lens mount (S-mount)
MIPI CSI-2 interface. onsemi AR0521 1/2.5" 5MP color image sensor with ISP. M12 lens mount (S-mount). -20° to 60° C (limited by the included lens) Temp.
-
수량>0
-
단가US$123.50
사용 목적: For Evaluation/Development
× ![]()
