Carrier Boards - Apalis Arm Family

The Apalis Carrier Boards support advanced interfaces such as PCIe, SATA, Gbit Ethernet along with many more connectivity and multimedia interfaces. These carrier boards are compatible with all the modules in the Apalis family. The Apalis Evaluation Board, which is ideal for engineering development, is a full-blown board that offers all the interfaces supported by Apalis modules. The cost-effective Ixora Carrier Board, with its small form-factor, can be used for mass-production of end-products based on Apalis modules.

  ×Ixora Carrier Board×Apalis Evaluation Board×Apalis Partner Carrier Boards
Ixora Carrier BoardApalis Evaluation BoardApalis Partner Carrier Boards
DatasheetDatasheet
detail...detail...detail...
Connectivity    
Supported ModulesEntire Apalis FamilyEntire Apalis FamilyEntire Apalis Family
USB 3.02x Host1x Host, 1x OTGup to 1x Host / 1x OTG
USB 2.01x Host / 1x OTG4x Hostup to 4x Host
EthernetGigabit Gigabit up to 11x 10/100/1000 MBit
PCIe1x Mini PCIe2x 1 slot / 1x Mini PCIeup to 2x miniPCIe
I2C2x3xup to 2x I2C
SPI1x2xup to 2x SPI
UART3x RS2322x RS232, 1x RS422/485up to 8x RS-232/422/485
IrDA1x
PWM4x4xup to 4x PWM
GPIOup to 40up to 135up to 16x
Analog Input4x4xup to 4x Analog Input
Serial ATA1x mSATA1x / 1x mSATA (shared)up to 1x mSATA
SDIO/SD/MMC1x 4 Bit (microSD)1x 8 Bit, 1x 4 Bitup to 1x SD/MMC 4-Bit
CAN2x2xUp to 2x
Input / Output    
Switches8x
LEDs2x8x
Multimedia    
LVDS1x Dual Channel1x Dual Channel1x Dual Channel
Digital Audio7.1 Channel HD Audio Codec (incl. analogue connectors)
S/PDIF In / Out1x / 1x1x (Out also on TOSLINK)1x / 1x
HDMI1x1x (Through DVI-I connector)1x
VGA1x1x
RGB1x (24 Bit)1x (24 Bit)
Capacitive TouchYes
Resistive Touch4/5-wire4/5-wireup to 4/5-wire
Camera Parallel Interface1x 10 Bit1x 8/10/12 Bit
Camera Serial Interface1x Quad Lane MIPI CSI-2On Mezzanineup to 3 MIPI CSI-2
Analog Audio Line in1x (Stereo)1x (Stereo)1x (Stereo)
Analog Audio Mic in1x (Mono)1x (Mono)1x (Mono)
Analog Audio Headphone out1x (Stereo)1x (Stereo)1x (Stereo)
Other    
Type Specific Board ConnectorYes
USB-to-RS232 Transceiver1x
RTC on Board1x1x1x
Altium CAE Data Freely AvailableYesYes
JTAGYes
Physical    
Supply Voltage7-27V DC7-27V DC5 - 36V DC
On-Board Power Supplies5V 5A
3.3V 5A
5V 5A
3.3V 5A
Size125 x 90 mm250 x 250 mm
Temperature0° to +70° C
-20° to +85° C(1)
-40° to +85° C
Minimum Product Commitment2030

(1) This temperature range applies excluding the Ethernet connector

* The exact number of supported interfaces depends on the Computer on Module used along with the carrier board. Please check the respective Computer on Module and Carrier Board datasheets for further details.